Mobility Parameter#

Mobility Parameter = CONSTANT <float> []

Description / Usage#

This card is used in the Giesekus model in the nonlinear stress terms. The card should be included in the input when the option selected for the Polymer Constitutive Equation card is GIESEKUS. Definitions of the input parameters are as follows:

CONSTANT

Name of the model for the mobility parameter.

  • <float> - the value of the mobility parameter.

This card does not have to be present for constitutive equations other than GIESEKUS.

Examples#

The following is a sample card that sets the mobility parameter to 0.2:

Mobility Parameter = CONSTANT 0.2

Technical Discussion#

No Discussion.